Removal Tips
1. Use lever under left strap outrigger to open.
2. There is a small recess to pull the lens up.
3. Pull out lens.
When Installing back in
1. IMPORTANT - Be sure to push lens into frame correctly. There is a small 'hook tab' inside the right side of frame that must locate.
2. Push into place and clip left side making sure lens hole aligns to clip.
3. Close locking arm.
Watch this easy video and take you time in application.
Make your lenses last longer. Follow these couple of simple tips so you don't scratch lenses.
Our straps have a unique one way clip, that can be removed for washing using the following technique.
Washing can be done by hand or by gentle machine wash. Must always be a cold wash. Normal washing soap can be used but be sure to rinse thoroughly.
With a knife or the end of a thin metal ruler carefully insert between the black clip and the wing frame of the goggle. The goal is to to create enough of a gap, to enable the clip to be free when you pull the strap.
Holding the inserted knife and the very start of the strap pull them at the same time, it should release freely. If it is not removing, you may need slightly more gap.
To re-install after washing you just push back in, your should hear positive 'click.'
“Quality, premium features and fair pricing. A brand that gives a shit about your riding as much as we do our own. That’s the Dust and Mirrors® promise.”
